Flow imaging for multi-component flow measurement

Abstract

For pseudo-homogeneous flows, measurements of density and mean velocity can give the component mass flow rate of a two-component mixture. However, for accurate measurement of non-homogeneous flow rate, the density and velocity distribution across the cross-section of the pipe must be known. The most practical way of obtaining this information is by using the flow imaging technique. A recently developed capacitance system gives 60 frames per second images of oil/water flow in a 78 mm pipe. The target spatial resolution is one part in 20 by distance (one in 400 by area). The electrical properties of each imaged boundary are functionally related to the imaged value, so the component ratio of a two-component mixture within a boundary can be measured, although individual particles cannot be imaged. Design data shows how the basic system can be part of a complete system for component mass flow measurement.