Abstract
SummaryProgressing cavity pump (PCP) is the essential booster equipment in oil–gas mixing delivery. Changes in relevant parameters in PCP operations directly affect the working performance and service life of the pump. On the basis of computational fluid dynamics (CFD) in this study, we apply dynamic grid technology to establish a 3D flow field numerical calculation model for the CQ11-2.4J PCP, which is used in the field of the Hounan Operation Area in Changqing oil field, China. The effects of several operating parameters, such as oil viscosity, pump rotation speed, differential pump pressure, and void fraction of oil, on the pressure and the velocity distribution of the PCP flow field are examined. Various performance parameters in the transport of the oil–gas two-phase mixture are used in the analysis, including volumetric flow rate, slippage, shaft power, volumetric efficiency, and system efficiency. The results show that the pressure and speed distribution in the pump chamber of the PCP is relatively homogenous under different working conditions, whereas the pressure and speed exhibited sharp changes at the stator and rotor sealing line and adjacent areas in the pump chamber. Increasing the viscosity of the oil and the speed of the rotor can effectively improve the flow characteristics of the PCP, but extremely high pump rotation speed would cause a decline in system efficiency. Increasing the differential pressure and the void fraction of oil would result in a decrease in the volumetric flow rate and efficiency of the PCP. Considering the variation law of the PCP's performance parameters, the optimal interval for each operating parameter of the PCP is as follows: Oil viscosity at 50–100 mPa·s, pump rotation speed at 200–300 rev/min, differential pressure at 0.2–0.3 MPa, and the void fraction of oil not more than 50%. This research can provide technical support for the optimization of the working conditions of the PCP on site.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
