Abstract
The intake port of a CA4DD diesel engine was investigated by a computational fluid dynamics (CFD) numerical simulation to enhance the intake swirl and improve the flow characteristics in the engine. The uniform design method was applied to study the influence of guide vanes with different parameters on the intake process at various valve lifts. Nine guide vane models were established and compared to the base model using CATIA™ 3D CAD software. Numerical simulations were conduct with Xflow software based on the lattice Boltzmann method (LBM). The distributions of the streamlines, vorticity, velocity and turbulent intensity in each cylinder were simulated and analyzed. The results show that the influence of the guide vanes on the swirl ratio was greater than 37%, and the flow coefficient was less than 5% compared to the base model. Scheme 5, H7.5-L50-θ20 (guide vane height of 7.5 mm, length of 50 mm and angle of 20°), provided good performance. The flow characteristics of the optimal guide vane model were verified through a steady flow test. When the guide vane aspect ratio and angle were within the ranges of 3.5-6.9 and 12.2°-20.2°, respectively, the swirl ratio had the best effect at maximum valve lift. This study provides a theoretical basis for improving the performance of dual-intake diesel engines.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.