Flow boiling heat transfer enhancement under ultrasound field in minichannel heat sinks

Abstract

The enhancement of the heat transfer assisted by ultrasound is considered to be an interesting and highly efficient cooling technology, but the investigation and application of ultrasound in minichannel heat sinks to strengthen the flow boiling heat transfer are very limited. Herein, a novel installation of ultrasound transducers in the flow direction of a minichannel heat sink is designed to experimentally study the characteristics of heat transfer in flow boiling and the influence of operation parameters (e.g., heat flux, mass flux rate) and ultrasound parameters (e.g., frequency, power) on the flow boiling heat transfer in a minichannel heat sink with and without ultrasound field. Bubble motion and flow pattern in the minichannel are analyzed by high-speed flow visualization, revealing that the ultrasound field induces more bubbles at the same observation position and a forward shift of the onset of nucleation boiling along the flow direction, as ultrasonic cavitation produces a large number of bubbles. Moreover, bubbles hitting the channel wall on the left and right sides are found, and the motion speed of the bubbles is increased by 31.9% under the ultrasound field. Our results demonstrate that the heat transfer coefficient obtained under the ultrasound field is 53.9% higher than in the absence of the ultrasound field under the same conditions, and the enhancement ratio is decreased in the high heat flux region due to the change of the flow regime with increasing heat flux. This study provides a theoretical basis for the application of an ultrasound field in minichannel heat sinks for the enhancement of flow boiling heat transfer.