Abstract
The flow and heat transfer of Al2O3–water nanofluid in a channel partially filled with porous media is investigated numerically. The turbulence effect in the porous media is taken under consideration in this article. A simple case is simulated first to evaluate the accuracy of the results in comparison with the available data. The turbulent kinetic energy profile is investigated at a flow cross section. The results show that the maximum turbulent kinetic energy occurs in the clear fluid region in the vicinity of the porous media region. The turbulent kinetic energy is a decreasing function of the porosity of the porous medium. The effect of porosity on the variation of turbulent kinetic energy decreases with the increase in the porosity of the porous medium. The turbulent kinetic energy in clear fluid and porous media regions decreases with the increase in nanofluid concentration from 0.01 to 0.03, and it increases with the increase in nanofluid concentration from 0.03 to 0.05. The temperature of the nanofluid increases with the increase in the nanofluid concentration and decrease in the porosity of porous media. It is shown that for this case, with the increase in nanofluid concentration and porosity of porous media, the skin friction coefficient increases and the Nusselt number decreases.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
