Flow and heat transfer characteristics of single and multiple synthetic jets impingement cooling

Abstract

In this paper, the comparison between synthetic jet actuator with single axisymmetric orifice and multiple axisymmetric orifices is presented. The aim of this paper is to compare the flow and heat transfer characteristics of single and multiple synthetic jet impingements cooling. The multiple orifice configurations had a central orifice and a satellite orifices placed in the pitch circle. The synthetic jet actuator had central orifice with 0, 3, 4, 5 and 6 orifices placed in the diameters of the relative pitch circle p/d = 2.5, 3 and 4. A total of 13 various geometric configurations were tested experimentally. In the multiple orifice configurations, the total cross-section area was approximately equal to the cross-section area of the single orifice configuration. The input power delivered to the synthetic jet actuator was maintained constant and equal to 3.00 W. The synthetic jet actuator energetic efficiency, Reynolds number, equivalent Reynolds number, radial and axial distributions of pressure coefficient, and heat transfer characteristic were presented. The synthetic jet issuing from multiple orifice plate merged at some axial distance, creating a single axisymmetric jet. The merging jet axial distances were determined for all investigated configurations. In the present paper, the integral quantities averaged over all orifices cross section area, or over impingement plate much larger than total orifices area, were analyzed for the purpose of objective comparison. From all various investigated parameters obtained from five different and independent experimental methods, the following conclusion may be made: if the total orifice cross section area in the case of single and multiple orifice synthetic jet is similar and real power deliver to the SJA is maintained at the same level the resulting equivalent Reynolds number and equivalent dimensionless stroke length achieved similar values and the impinging jet equivalent Nusselt number also achieved comparable values and distributions.