Flow and heat transfer characteristics of circular impinging jet accompanying annular suction flow

Abstract

Experiments were conducted on the effects of a wall distance and velocity ratio of suction flow to injection flow on the flow and heat transfer characteristics of a circular impinging jet accompanying an annular suction flow. As a result, it is found that in the case of accompanying suction flow, a higher Nusselt number can be obtained compared with in the case without suction flow, under a condition of the wall distance within eight times of injection pipe diameter from the near pipe exit edge. In addition, when the effect of velocity ratio is examined at a fixed arbitrary wall distance, it is found that there exists an optimum velocity ratio where the Nusselt number becomes the maximum. It is shown that these heat transfer characteristics are closely associated with the fluctuating velocity and the mean velocity in the two-dimensional velocity field observed by Particle Image Velocimetry (PIV).