Abstract
Aiming to solve the problems related to the slow settling speed and the long-term consumption of ultra-fine tailings in mine filling, the effect of flocculant type on the flocculation and settling performance of ultra-fine tailings was studied through static sedimentation experiments on tailings. The microstructure of the flocculation was observed and analyzed using an electron microscope. On this basis, the selection of the optimum flocculant type and dosage parameters was carried out. The results show that the best addition amount of the AZ9020 anionic flocculant was 30 g/t, a solution concentration of 0.3%, and a stirring time of more than 45 min. The floc structure of the full-tailings flocculation solution was formed by the AZ9020 anionic flocculant. Moreover, the size of less than 0.1 μm was still relatively large; thus, the overall size of the structure was small and uniformly dispersed. The floc solution had the smallest porosity, the fractal dimension was the largest, the molecular weight of the floc was the largest, and the floc was the most compact, making it appropriate for the rapid removal of floc structures from water. Sedimentation is also the best flocculant for flocculation and sedimentation. The size of the flocs decreased as the height of the flocculation sediment bed increased during flocculation and sedimentation. The research results provide a microscopic view for the selection of the best flocculant type.
Highlights
IntroductionTailings can prevent surface subsidence and can reduce the occupation of ground space by tailing stacking
As a cement filling, tailings can prevent surface subsidence and can reduce the occupation of ground space by tailing stacking
The calculation shows that the height of the clear layer of L4 is always lower than that of the four other groups
Summary
Tailings can prevent surface subsidence and can reduce the occupation of ground space by tailing stacking. The use of tailings as a cement filling is an inevitable choice for the green development of current mines [1,2,3]. Ultrafine tailings encounter problems, such as a long natural settlement time and slow speed, due to their high content of fine particles, failing to meet the large-scale continuous filling requirements of mines [4,5,6]. Increasing the sedimentation efficiency by adding flocculants is a common practice in current mines to meet the needs of large-scale continuous filling underground. Selecting a reasonable flocculation type according to the characteristics and properties of tailings is crucial to ensure the flocculation and settlement effect of mine-filling systems
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
