Abstract
Importance of Fe (III) species in ferric chloride (FeCl3), polyferric chloride with basicity values (B, OH−/Fe3+ molar ratio) of 1.0 and 2.2 (denoted as PFC10 and PFC22) was investigated in terms of floc properties and membrane fouling during coagulation–ultrafitration process. The Fe (III) species distribution in these three coagulants was measured by a timed complexation spectroscopy method. Floc characteristics by FeCl3, PFC10 and PFC22 were studied using a laser diffraction particle sizing device. Moreover, SEM images and resistance analysis were conducted to explore mechanism of membrane fouling. The results indicated that the monomeric and polymeric species (Fea and Feb) increased as follows: FeCl3 > PFC10 > PFC22. FeCl3 had better coagulation performance in terms of turbidity, UV254 and DOC than PFC10 and PFC22. Meanwhile, FeCl3 produced largest flocs with loosest structure which were, however, weakest with best recoverability. PFC10 took the second place regarding to floc properties. The membrane fouling of PFC10 and PFC22 was more serious than FeCl3. SEM images and resistance analysis showed that cake layer resistance relative to the total resistance produced by FeCl3 was lowest due to the larger and looser flocs with high re-growth ability. Thus, more Fea and Feb could effectively reduce the membrane fouling.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
