Flight dynamics of aircraft incorporating the semi-aeroelastic hinge

Abstract

Aircraft like the Boeing 777-X use on-ground folding wingtips to meet the airport gate size restriction while increasing the aspect ratio during flight to reduce induced drag. A recent concept of aircraft design is to utilise in-flight floating wingtips as a means of load alleviation, which is known as semi-aeroelastic hinge (SAH). This device allows wingtips to be released during manoeuvre and severe gusts to alleviate wing loads, while locking the wingtips during cruise to maintain an optimum aerodynamic shape. This paper develops a flight mechanics model incorporating flexible wings to study the influence of the SAH device on multiple aspects of aircraft flight dynamics. The dynamic responses of the aircraft to gusts and control surface inputs are computed and compared for various hinge and wingtip configurations and release times. It was found that the gust load measured from the wing with free hinge configuration was approximately 40% lower compared to that of the fixed hinge case. It is also shown that when the SAH is released, it can significantly reduce an aircraft's roll damping and the frequency of the short-period mode, leading to higher roll and pitch rates. Furthermore, it shows that the transient responses following the wingtip release will exacerbate the responses induced by gusts, and greater load alleviation can be achieved by manipulating the hinge release time for each gust length. Finally, a step input of the elevator during the hinge release was found to be beneficial for enhancing the gust load alleviation.