Abstract
This article investigates the flexural strength of notched Portland cement concrete (PCC) beams filled with alkali-activated binders (AAB). The low calcium fly ash (LFA) and ground granulated blast furnace slag (GBFS) are used to develop AAB. The bond strength performance between notched PCC beam and AAB has been studied. A different mix of AABs were investigated: those are low calcium fly ash (LFA) paste, FA+GGBS paste and GGBS paste with three different types of alkaline solutions viz., 10M sodium hydroxide solution (SH), sodium silicate solution (SS), and 10M sodium hydroxide mixed with sodium silicate solution solutions (SHSS). The flexural strength of notched PCC beams filled with AABs at different influence factors are tested under three point bending. Test results evident that the flexural strength of PCC notched beams tends to slightly increase with increasing of GBFS content for all kinds of alkaline solutions. The fracture surface of specimens is reasonable to bond strength obtained. The notched PCC beams filled with FA+GBFS activated with SHSS solution provides the highest 28-day flexural strength of 3.57MPa. This research attempts to use waste materials as a promoter in AAB as an alternative repair material, which is significant in addressing the sustainable use of waste materials in terms of engineering, economical and environmental perspectives.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
