Flexural Response of Functionally Graded Rubberized Concrete Beams.

Abstract

Recycling rubber and/or steel fiber components of waste tires in construction applications is a venue for maximizing the recycling rate of these items. Additionally, it supports the move towards producing sustainable construction materials and conserving natural resources. Previous research explored the viability of employing recycled waste rubber particles as an alternative for natural aggregate. Despite the adverse effect of rubber on the mechanical properties of concrete (e.g., lower compressive strength), it produces several advantages, including excellent dynamic and ductility properties, which can be utilized in structural members critical to dynamic loads, e.g., blasts, earthquakes, and impacts. In an effort to expand the adoption of waste rubber in concrete beams and to eliminate key concerns associated with the degradation of their flexural behavior, the functionally graded (FG) beams concept was utilized. The present investigation comprised the testing of five beams using a four-point bending configuration. Plain concrete, rubberized concrete (RuC), and steel-fiber reinforced rubberized concrete (SFRRuC) beams were cast along with FG beams arranged in two layers. The top layer of the FG beams comprised plain concrete, while the bottom layer consisted of RuC or SFRRuC. Experimental findings indicated that the flexural behavior of the FG beam with layers of SFRRuC and plain concrete exceeded the flexural strength, displacement ductility ratio, and toughness performances of the plain concrete beam by 9.9%, 12.9%, and 24.4%, respectively. The moment-curvature relationship was also predicted for the tested beam and showed an excellent match with the experimentally measured relationship.