Abstract
Flexural properties of visually graded southern pine structural lumber were evaluated. Several grade controlling characteristics were considered relative to bending properties and compared with current design values. A total of 751 southern pine lumber specimens were obtained from a broad spectrum of regions in the southeastern United States. Visually graded No. 2, nominally two inch thick specimens, in four and six inch widths, were obtained from commercial sawmills. All specimens were evaluated by a certified grader in the laboratory. Actual dimensions, weight, and moisture content (MC) were measured. Growth and manufacturing related characteristics were identified and classified into two categories: strength reducing characteristics (SRC) and grade reducing characteristics (GRC). Specific gravity (SG), bending modulus of elasticity (MOE), and modulus of rupture (MOR), were determined for each specimen. The presence of knots was identified as the most significant SRC; their presence had the most significant impact on SG, MOE and MOR. For GRC, specimens with knots, warp and specimens that fell into the category none, were significantly lower in SG, MOE and MOR. MOE and the allowable design bending strength values yielded in this study met the current design value criteria for both widths tested.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
