Abstract
AbstractThis study aims to investigate the bending performance and evaluation of aluminum‐carbon fiber reinforced plastic (Al‐CFRP) riveted laminates under varying parameters via self‐pierce riveting and three‐point bending tests. Through the self‐pierce riveting process test, a riveted joint meeting standard requirement was obtained. Based on this joint combination form, Al‐CFRP self‐pierce riveted laminates were prepared. The bending performance test showed the riveted laminate with a span of 80 mm had the greatest bending resistance at a thickness of 2 mm, and the overall strain of the Al‐CFRP self‐pierce riveted laminates was observed by digital image correlation (DIC) technology. Subsequently, validated numerical simulation modeling was conducted by correlating with the test results. On this numerical simulation model basis, further parametric studies and bending performance evaluations (including number of rivets, CFRP lay‐up angle, and laminates width) of the Al‐CFRP self‐pierce riveted laminates were systematically carried out. It was found that the peak load F and bending strength R improved by 1.32% and 26.66%, respectively, while the mass M reduced by 8.99%, for the design variables of var1 of 20 mm, var2 of 6, and var3 of [0/90°]2s.Highlight An Al‐CFRP riveted laminate structure is proposed to improve the bending properties of riveted laminates by changing the rivet parameters and laminate parameters. The bending properties of riveted laminates with different spans were investigated under three‐point bending loading conditions. The DIC technique observed the changes in the strain field of riveted laminates during bending. The effects of different structural parameters on the bending performance of Al‐CFRP riveted laminates were investigated by numerical simulation. An evaluation method combining the gray correlation degree and the combination assignment method is proposed to obtain the optimum riveted laminate structure under bending load conditions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
