Abstract
To improve the torsional buckling resistance and enhance the load-bearing capacity and ductility of H-shaped steel beams with carbon reduction materials, the concept of combining H-shaped steel with bamboo scrimber has been proposed, in which the bamboo scrimber, an eco-friendly, lightweight, and high-strength material, promises significant structural benefits. Five full-scale specimens were designed and tested, including one H-shaped steel, two bamboo scrimber beams, and two composite beams. Additionally, further simulation tests were conducted using the verified finite element model (FEM). The experimental results revealed a remarkable increase in the ultimate bearing capacity of the composite beams by 96.5 % compared to bamboo scrimber-only beams and 72.7 % compared to steel-only beams. Meanwhile, distinct from the brittle fracture characteristics of the bamboo scrimber beams, which include instantaneous crack propagation and interlaminar cracking, the composite beams exhibited localized vertical cracks within the beam's tensile zone, effectively avoiding the torsional buckling issue of the H-shaped steel beam. The results further demonstrated that increasing the cross-sectional size of the composite beams can significantly enhance their flexural stiffness (up to 669 %), and reduce the deflection at the ultimate flexural moment. When the area of the bamboo scrimber in the cross-section was reduced with an unchanged steel profile, the initial stiffness dropped to 79 % without incurring any structural instability. Furthermore, by integrating the experimental and simulation results, a fiber element model for this composite beam structure is proposed to predict the maximum flexural moment value in the ultimate state. A corresponding calculation program was developed, and it is found that the calculated predicted ultimate flexural moment values exhibited negligible deviation from both experimental and FEM results, with AV of 1.0001, AAE of 2.21 %, and COV of 3.28 %.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.