Abstract
This study presents an experimental investigation of the flexure behavior of exterior beam-column joints made from hybrid concrete (normal concrete (NC) and reactive powder concrete (RPC)) or hybrid reinforcement (steel and carbon fiber reinforced polymer (CFRP) bars internally or externally by near surface mounted (NSM) technique). Nine hybrid-reinforced concrete beam-column joint specimens under the effect of static or cyclic loading were studied and tested within three test groups. Several variables that affect the behavior of the beam-column joint region are investigated such as: type of loading (static or cyclic), type of hybridization (concrete hybridization or reinforcement hybridization), and area of concrete hybridization. The results showed that using RPC as a replacement concrete at different areas of beam-column joint under static loading improved the ultimate load capacity and first cracking load to about 8–32% and 20–60%, respectively, compared with the reference NC joint with increase in the ductility of about 6–14%. Moreover, using the same technique under cyclic loading condition showed an increase in the ultimate load of about 39%, with improvement in the cumulative ductility of about 12% compared with the reference NC joint. On the other hand, using CFRP bars as (internal or external) hybridization system (33% of main reinforcement) under static loading caused increments of ultimate and first cracking loads of about 11%, 8% and 0%, 30%, respectively compared with the reference steel reinforced joint; while the ductility ratio increased about 36%, 5%, respectively. Moreover, the internal hybrid reinforcement system exhibited a decrease in the ultimate load of about 15% and reduction in the cumulative ductility of about 40% under cyclic loading.
Highlights
The beam-column joint is defined as the portion of the column within the depth of the deepest beam that frames into the column [1]
The target of this work is to conduct an experimental investigation of the ultimate strength, cracking patterns, failure patterns, ductility, and energy absorption of reinforced concrete exterior BCJs made of hybrid concrete or hybrid reinforcement; and to study the factors that influence the flexural behavior of the hybrid BCJs, such as type of loading, type of hybridization, and area of concrete hybridization
Reactive powder concrete (RPC) at different areas) under static loading condition, the ultimate and the first cracking loads increased about 8–32% and 20–60% compared with the homogenous Normal concrete (NC) joint, respectively
Summary
The beam-column joint is defined as the portion of the column within the depth of the deepest beam that frames into the column [1]. Mahdi [6] investigated the conduct and extreme strength of concrete corbels with hybrid reinforcement (CFRP and steel) rebars subjected to vertical distributed applied load. He found great enhancement in the conduct and the ultimate strength of the specimens with hybridization technique of main tension reinforcement and horizontal reinforcement (closed stirrups). The target of this work is to conduct an experimental investigation of the ultimate strength, cracking patterns, failure patterns, ductility, and energy absorption of reinforced concrete exterior BCJs made of hybrid concrete or hybrid reinforcement; and to study the factors that influence the flexural behavior of the hybrid BCJs, such as type of loading (static or cyclic), type of hybridization (concrete hybridization or reinforcement hybridization), and area of concrete hybridization
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
