Abstract
Flexible ultrasonic transducers (UTs) consisting of a metal foil, a piezoelectric ceramic film, and a top electrode have been developed. The flexibility is realized owing to the porosity of piezoelectric film and the thinness of metal foil. In this paper, the stainless steel (SS), lead-zirconate-titanate (PZT)/PZT composite and silver paste were chosen as metal foil, piezoelectric film, and top electrode materials, respectively. The SS foil serves as both substrate and bottom electrode. The PZT/PZT piezoelectric composite film is made by the sol-gel spray technique. PZT/PZT films of thicknesses from 40 to 70 microm were fabricated onto SS foils. The capability of these flexible sensors operated in the pulse-echo mode for nondestructive testing on flat and curved surfaces of different materials at room temperature and 160 degrees C has been demonstrated. Numerical simulations of the effects of the metal foil thickness on the ultrasonic performance of flexible UTs also were carried out, and the results are in reasonable agreement with experimental data. In addition, a PZT/PZT flexible transducer showed a signal strength comparable with that obtained by a commercial room temperature broad bandwidth transducer.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
