Abstract
In this work, we present a novel, sensitive, easy-to-fabricate, flexible amperometric sensor constituted by screen-printed silver (Ag) electrodes functionalized with a copper (Cu) film electrodeposited on top of a spray coated network of single-walled carbon nanotubes (SWCNTs). The Cu/SWCNTs/Ag electrode showed excellent catalytic activity towards the electro-reduction of nitrate ions at neutral pH with a significant increase in cathodic peak currents in comparison with the electrode without SWCNTs (Cu/Ag). The developed Cu/SWCNTs/Ag sensor showed a wide linear detection range from 0.5 μM to 6.0 mM (0.31 mg/l to 372.02 mg/l) with good sensitivity (18.39 μA/mM) and a calculated limit of detection (LOD) of 0.166 nM (10.29 μg/l). It also showed a good selectivity (maximum standard deviation (SD) was 3.25 μA) towards different interfering ions (Fe2+, Na+, Cu2+, SO42-, CH3COO-, Cl-, NO2- and HCO3-), as well as good reproducibility, mechanical durability, time and temperature stability. In real sample analysis (tap and river water), the sensor exhibited good agreement with the compared outcome of high-performance liquid chromatography (HPLC) measurements, proving to be a promising analytical tool for the detection of nitrate in water.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
