Abstract
Bio-polyols (BPOs), characterized by a hydroxyl number up to around 90 mg KOH/g, narrow polydispersity index and relatively low molecular mass up to 2000 g/mol, were synthetized from partially and completely epoxidized soybean and linseed oils and caprylic acid or 3-phenyl butyric acid. These BPOs were used in the presence of toluene diisocyanate to produce polyurethane (PU) foams by using a quasi-prepolymer method involving a two-step reaction. A detailed structural investigation of the prepolymers from toluene diisocyanate and both BPOs and polypropylene glycol was conducted by SEC and solution NMR. The apparent density of the foams was in the range of 40-90 kg/m3, with higher values for foams from the aromatic acid. All the foams showed an open-cell structure with uniform and regular shape and uniform size. The specific Young's moduli and compression deflection values suggest superior mechanical properties than the reference foams. The novel synthesized polyurethanes are excellent candidates to partially replace petroleum-based materials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
