Flexible Piezoelectric Touch Sensor by Alignment of Lead‐Free Alkaline Niobate Microcubes in PDMS

Abstract

A highly sensitive, lead‐free, and flexible piezoelectric touch sensor is reported based on composite films of alkaline niobate K0.485Na0.485Li0.03NbO3 (KNLN) powders aligned in a polydimethylsiloxane (PDMS) matrix. KNLN powder is fabricated by solid‐state sintering and consists of microcubes. The particles are dispersed in uncured PDMS and oriented by application of an oscillating dielectrophoretic alignment field. The dielectric constant of the composite film is almost independent of the microstructure, while upon alignment the piezoelectric charge coefficient increases more than tenfold up to 17 pC N−1. A quantitative analysis shows that the origin is a reduction of the interparticle distance to under 1.0 µm in the aligned bicontinuous KNLN chains. The temperature stable piezoelectric voltage coefficient exhibits a maximum value of 220 mV m N−1, at a volume fraction of only 10%. This state‐of‐the‐art value outperforms bulk piezoelectric ceramics and composites with randomly dispersed particles, and is comparable to the values reported for the piezoelectric polymers polyvinylidenefluoride and its random copolymer with trifluoroethylene. Optimized composite films are incorporated in flexible piezoelectric touch sensors. The high sensitivity is analyzed and discussed. As the fabrication technology is straightforward and easy to implement, applications are foreseen in flexible electronics such as wireless sensor networks and biodiagnostics.