Flexible Photodriven Actuator Based on Gradient-Paraffin-Wax-Filled Ti3C2Tx MXene Film for Bionic Robots.

Abstract

Due to their high flexibility and adaptability, bionic robots have great potential in applications such as healthcare, rescue, and surveillance. The flexible actuator is an essential component of the bionic robot and determines its performance. Even though much progress has been achieved in bionic robot research, there still exists a great challenge in preparing a flexible actuator with a large stroke, high sensitivity, fast response, low triggering power, and long lifetime. This study presents a flexible actuator based on a paraffin wax and Ti3C2Tx MXene (PW-MX) film composite. Such a flexible actuator delivers an excellent actuation performance, including a large curvature change (2.2 × 102 m-1), high thermal sensitivity (4.6 m-1/°C), low triggering power of light (76 mW/cm2), wavelength selectivity, fast response (0.38 s), and long lifetime (>20000 cycles). Due to the high thermal sensitivity and the strong infrared absorption of the PW-MX film, crawling motion of an inchworm robot based on PW-MX film can be triggered by infrared irradiation from the human finger. To mimic living organisms with bioluminescence, we prepared a PW-MX actuator with green fluorescence by doping PW-MX film with CdSe/ZnS quantum dots. The integration of luminescent function enables the PW-MX actuator to deliver information under light stimulation and to camouflage under a background of green foliage actively. With its merits of ease of fabrication and high actuation performance, the flexible PW-MX actuator is expected to lend itself to more applications in the future.