Flexible Fiber Shaped Self-Powered System Based on Conductive PANI for Signal Sensing and Energy Harvesting.

Abstract

As science and technology advance, people are increasingly inclined to use sustainable and portable wearable electronic devices. The traditional supporting power source, batteries, suffers from issues of flexibility and lifespan, severely constraining the development of wearable devices. Alternatively, the self-powered system, serving as a power source, can effectively collect energy from the surrounding environment, achieving maintenance-free operation and high adaptability, which has attracted widespread research. The coaxial fiber-structured self-powering system proposed in this study is based on a supercapacitor (SC) and a triboelectric nanogenerator (TENG). The carbon fiber (CF) has polyaniline (PANI) and rGO connected to it, and a friction layer of silicone rubber is wrapped around the outside. The conductivity of the fiber was increased by multiple PANI graftings, and a coaxial fiber-type TENG with a 2 mm diameter was created. Following weaving, the TENG displays a high power density of 576 mW m-2 and an open-circuit voltage of 160 V and a short-circuit current of 9 μA. In addition, the flexible fiber-shaped supercapacitor uses NiAl-LDHs@CF as the negative electrode and AC@CF as the positive electrode, showing a specific capacitance of up to 281.4 mF cm-2. Furthermore, the SC and TENG are assembled into a coaxial self-power supply system, which has excellent performance and shows extensive potential applications in the field of wearable device power supply.