Abstract
A facile and novel fabrication method is demonstrated for creating flexible poly(ethylene terephthalate) (PET)-embedded silver meshes using crack lithography, reactive ion etching (RIE), and reactive silver ink. The crack width and spacing in a waterborne acrylic emulsion polymer are controlled by the thickness of the polymer and the applied stress due to heating and evaporation. Our innovative fabrication technique eliminates the need for sputtering and ensures stronger adhesion of the metal meshes to the PET substrate. Crack trench depths over 5 μm and line widths under 5 μm have been achieved. As a transparent electrode, our flexible embedded Ag meshes exhibit a visible transmission of 91.3% and sheet resistance of 0.54 Ω/sq as well as 93.7% and 1.4 Ω/sq. This performance corresponds to figures of merit (σDC/σOP) of 7500 and 4070, respectively. For transparent electromagnetic interference (EMI) shielding, the metal meshes achieve a shielding efficiency (SE) of 42 dB with 91.3% visible transmission and an EMI SE of 37.4 dB with 93.7% visible transmission. We demonstrate the highest transparent electrode performance of crack lithography approaches in the literature and the highest flexible transparent EMI shielding performance of all fabrication approaches in the literature. These metal meshes may have applications in transparent electrodes, EMI shielding, solar cells, and organic light-emitting diodes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
