Abstract
A novel continuous and flexible electroflotocoagulation (EFC) reactor was built using concentric cylindrical Al and Fe electrodes, which can be operated either as anodes or cathodes linked to a DC connection. The reactor was operationally assessed related to various cell configurations that assured the required stages of coagulant dosage, mixing, reaction, and settling or flotation. The effects of several design variables and operational parameters (such as the electrode position that determines the reactor configuration, current density (i), flow rate (F), and the electrode area-treated volume ratio (Sel/V)) on the specific energy consumption versus the aluminum dose and charge loading rate were investigated. The most energy-efficient cell configuration using an aluminum anode and iron cathode was tested for the treatment of surface water (Bega river, Timisoara city, Romania) rich in hydrophobic natural organic matter (8.3 mg C∙L−1 and specific UV absorbance parameter of 3.9 L∙m−1∙mg−1) and with a high turbidity of 92 NTU, under flood conditions. The best results that assured 97% turbidity removal, 87% for absorbance recorded at 254 nm, and 60% for DOC removal, through enhanced electroflotocoagulation, were achieved for an operational current density of 10 A∙m−2 with specific energy and electrode consumption of 0.1 kW h∙m−3 and 0.017 kg Al∙m−3, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
