Abstract

Sustainable liquid fuels are essential for decarbonization of various means of transportation which are challenging to address through electrification or hydrogen use. A possible method for producing low-carbon liquid fuel is through the thermochemical biomass to liquid (BTL) process. In this study, we conduct a technoeconomic-environmental analysis of two processes which take advantage of integration of natural gas reforming and biomass gasification, with the objective of improving the economics. By integrating H2-rich syngas (a mixture of H2/CO) obtained from natural gas reforming with carbon-rich syngas from biomass gasification, we harness synergistic effects. This combination allows us to achieve the optimal H2/CO ratio required for methanol synthesis, while also ensuring efficient carbon utilization. In the first design, natural gas is reformed in an autothermal reformer (ATR) to produce syngas. A Solid Oxide Electrolysis Cell (SOEC) is utilized to supply the O2 for both gasification and reforming processes. The H2 produced by the SOEC adjusts the H2 content in the syngas before the methanol synthesis reactor. In the second design, natural gas is reformed in a gas-heated-reformer (GHR) before an ATR, while an Air Separation Unit (ASU) produces the O2 for the process. As a benchmark, the economics and flexible operation of both processes are compared to a conventional BTL process. In addition, the techno-economic impact of operating in biomass-only or natural gas-only modes are investigated. For a 134 MWth plant with 50 % of entering carbon from biomass, the levelized cost of methanol (LCOMeOH) of ATR+SOEC case is 34 % higher than the BTL reference case, while that of ATR+GHR case is 24 % lower than the BTL reference case. A lifecycle analysis (LCA) is conducted for these designs. Utilizing renewable electricity and 50 % biogenic carbon, the ATR+SOEC case emits 908 kgCO2e /tonne MeOH for a 100-year Global Warming Potential (GWP), while the ATR+GHR case emits 721 kgCO2e /tonne MeOH. For a 20-year GWP, these emissions are 1055 and 915 kgCO2e /tonne MeOH, respectively. These emissions correspond to more than 50 % reduction in LCA emissions when compared to natural gas based LCA emissions.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.