Flexible and strain conductive cotton yarn enabled by low-temperature sintering of silver paste with multifunctional sensing capability in human motion detection and wearable applications

Abstract

Flexible wearable textiles have attracted increasing attention, due to their potential applications in human motion detection, electric heating and humidity monitoring. However, the rigidity of metal materials contradicts the flexibility of textiles, and the complex preparation process and unfriendly environment hinder the development of metal materials as conductive materials of smart textiles. This study proposed a simple and environmentally friendly solution for smart textile preparation. Drawing on the bionic design principle of long-horned beetle’s exocuticle, the conductive layer on the surface of cotton yarn (CY) was formed by sintering the silver paste under low temperature of 200 ˚C. Silver Paste (SP) mainly composed with silver particles, terpineol (TE) and ethyl cellulose (EC). The resultant conductive yarn was characterized with high flexibility and high conductivity (4.08 × 103 S/cm). The conductivity of the yarn increases under tensile force, while decreases under non-tensile bending action. The strain sensor prepared by the yarn has a wide working range and high sensitivity, with distinguish performances of signal output according to the motion of different human body parts. The sensing behavior was also highlighted with the capability of micro-vibration strain of the human body, such as response to the pulse and throat. Furthermore, the conductive property of sintered silver paste cotton yarn (SSP-CY) has the capability of electric heating. The electric heating device based on SSP-CY can realize wired and radio heating, which resulted a maximum temperature of about 41 ℃. Therefore, the novel conductive cotton yarn has great potential in the application of high-sensitive wearable electronic devices.