Flat-panel imager energy-dependent proton radiography for a proton pencil-beam scanning system

Abstract

In proton-based radiotherapy, proton radiography could allow for direct measurement of the water-equivalent path length (WEPL) in tissue, which can then be used to determine relative stopping power (RSP). Additionally, proton radiographs allow for imaging in the beam’s-eye-view. In this work, a proton radiography technique using a flat-panel imager and a pencil-beam scanning (PBS) system is demonstrated in phantom. Proton PBS plans were delivered on a Varian ProBeam system to a flat-panel imager. Each proton plan consisted of energy layers separated by 4.8 MeV, and a field size of 25 cm × 25 cm. All measured data is binned into a layer-by-layer delivery in post processing. To build a calibration curve correlating detector response to WEPL, the plans were delivered to slabs of solid water of increasing thickness. Pixel-by-pixel detector response in the time/energy domain is then fit as a function of WEPL. Tissue equivalent phantoms are imaged for evaluation of WEPL accuracy. A spatial resolution phantom and a head phantom are also imaged. For all experiments, the detector was run with an effective pixel size of 0.4 mm × 0.4 mm. The proposed method reconstructed RSP with mean errors of 2.65%, −0.14%, and 0.61% for lung, soft tissue, and bone, respectively. In a 40 mm thick spatial resolution phantom, a 2 mm deep pinhole with 1 mm diameter can be seen. The accuracy and spatial resolution of the method show that it could be implemented for patient position verification. Further development could lead to patient-specific verification of RSP to be used for treatment guidance.