Abstract
We investigated the influence of metal vapor contamination of ceramic surfaces on flashover voltage (FOV) in vacuum. First, disk shape alumina (Al/sub 2/O/sub 3/) ceramics with surface resistivity (/spl rho/) of 10/sup 2/-10/sup 15/ /spl Omega/ were produced using deposition phenomena of metal vapor emitted from CuCr contacts. The impulse FOV for the ceramics decreased, as /spl rho/ reduced; FOV, the conditioning effect on FOV, and the scattering of FOV decreased when /spl rho/ was below 10/sup 12/ /spl Omega/. Therefore, the criterion value /spl rho/, which maintains excellent flashover performances of ceramic surface, is 10/sup 12/ /spl Omega/. Second, experimental vacuum interrupters (VIs) were produced to measure breakdown voltage before and after forty short-circuit current switchings with 20-40 kA/sub rms/ and were disassembled to measure the /spl rho/ of their inner ceramic surface. In a VI, which has inside diameters at both ends of the main shield much larger than the contact diameter, /spl rho/ was reduced to 10/sup 4/ /spl Omega/, further decreasing breakdown voltage between terminals.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
