Abstract
This experimental study investigates the relationship between flapping wing structure and the production of aerodynamic forces for micro air vehicle hovering flight by measuring full-field structural deformation and thrust generation. Results from four flexible micromembrane wings with different skeletal reinforcement demonstrate that wing compliance is crucial in thrust production: only certain modes of passive aeroelastic deformation allow the wing to effectively produce thrust. The experimental setup consists of a flapping mechanism with a single-degree-of- freedom rotary actuation up to 45 Hz at 70 deg stoke amplitude and with power measurement, a force and torque sensor that measures the lift and thrust, and a digital image correlation system that consists of four cameras capable of capturing the complete stroke kinematics and structural deformation. Several technical challenges related to the experimental testing of microflapping wings are resolved in this study: primarily, flapping wings less than 3 in. in length produce loads and deformations that are difficult to measure in an accurate and nonintrusive manner. Furthermore, the synchronization of the load measurement system, the vision-based wing deformation measurement system, and the flapping mechanism is demonstrated. Intensive data analyses are performed to extract useful information from the measurements in both air and vacuum.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
