Abstract
A series of polycarbonate (PC)/acrylonitrile butadiene styrene (ABS) (70/30 wt.%) nanocomposites with varying concentrations (0–5 wt.%) of multilayer graphene particles (GNP) were fabricated using melt extrusion process. The flammability, thermal, mechanical and morphological properties of the nanocomposites was investigated. Cone calorimeter analysis, limiting oxygen index (LOI) and UL94 flame rating tests revealed that addition of GNP to PC/ABS significantly improved the flame retardancy of PC/ABS/GNP nanocomposites. As much as 30.4% reduction in peak heat release rate was observed for the 3 wt.% GNP loading. The maximum LOI value of 26% was observed for the nanocomposites with 3wt.% GNP content. UL-94 V-2 rating and less dripping was observed for the nanocomposites compared with the pure PC/ABS sample. TGA analysis showed that incorporation of GNP enhanced the thermal stability and char yield of the nanocomposites. Scanning electron microscopy revealed the GNP nanoplatelets were unidirectionally aligned in the PC/ABS parallel to the surface of the nanocomposites.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
