Flame volume prediction and validation for lean blow-out of gas turbine combustor

Abstract

ABSTRACTLean Blow-Out (LBO) limits are critically important in the operation of aero engines. Previously, Lefebvre's LBO empirical correlation has been extended to the flame volume concept by the authors. Flame volume takes into account the effects of geometric configuration, spatial interaction of mixing jets, turbulence, heat transfer and combustion processes inside the gas turbine combustion chamber. For these reasons, LBO predictions based on flame volume are more accurate. Although LBO prediction accuracy has improved, it poses a challenge associated with Vfestimation in real gas turbine combustors. This work extends the approach of flame volume prediction based on fuel iterative approximation with cold flow simulations to reactive flow simulations. Flame volume for 11 combustor configurations were simulated and validated against experimental data. To make prediction methodology robust, as required in preliminary design stage, reactive flow simulations were carried out with the combination of presumed Probability Density Function (PDF) and discrete phase model (DPM) in Fluent 15.0 The criterion for flame identification was defined. Two important parameters—critical injection diameter (Dp,crit) and critical temperature (Tcrit)—were identified and their influence on reactive flow simulation was studied for Vfestimation. Results exhibit ±15% error in Vf estimation with experimental data.