Flame spread in an opposed forced flow: the effect of ambient oxygen concentration

Abstract

The velocity of flame propagation over the surface of thick PMMA and thin paper sheets has been measured as a function of the velocity and oxygen concentration of a forced gas flow opposing the direction of flame propagation. It is shown that although for thin fuels the flame spread rate always decreases as the opposed flow velocity increases, for thick fuels the dependence of the spread rate on the gas velocity is also a function of the ambient oxygen concentration. For low oxygen concentrations the flame spread rate decreases as the velocity of the gas flow increases. For high oxygen concentrations, however, the spread rate increases with the flow velocity, reaches a maximum and then decreases as the gas velocity increases. The velocity of the opposed flow at which the maximum occurs is a function of the oxygen concentration, decreasing as the concentration decreases. Following phenomenological considerations and simplified descriptions of the primary mechanisms occurring during the flame spread process, the experimental results are correlated by two non-dimensional parameters, one describing the gas phase kinetic effects and the other describing the process of heat transfer from the flame to the fuel. Such a correlation provides a powerful means of predicting the flame spread prcess as well as physical insight into the mechanisms controlling the propagation of the flame.