Flame spread and smoke temperature of full-scale fire test of car fire

Abstract

Full-scale experiments using two 4-door sedan passenger cars, placed side by side in the reverse direction, were carried out to establish the burning behavior and describe the spread of fire to adjacent car. The temperature was measured by thermocouples. Radiant heat flux was measured with heat flux gauge placed at a distance of 5m, at the right side of the car. Four cameras were placed inside the car and in the fire test room recording burning behavior during the test. Engine compartment was ignited by a sponge dipped with little gasoline. During the experiment, the ignition was initiated in the engine compartment of car I and approximately 20min were enough time for fire to spread into the second car. Fully-developed burning of two cars occurred at 29min. It was observed that the flame spread through car roof faster than through the bottom of car compartment. The fire followed a slow rate spread from engine compartment to car cab. The temperature inside the car peaked at the point of 900°C. The peak smoke temperatures at every location were measured at the range of 89–285°C. The smoke production at the time of 11min to 15min 50s of fire was 1.76m3/s, which was obtained through indirect calculation method.