Abstract
Fast-growing poplar (Populus tomentosa Carr) can produce wood veneers, but their poor quality restricts their application in construction and building. Modification of wood has the potential to improve its properties. In this study, poplar veneers were impregnated with calcium carbonate (CaCO3) to reinforce their performance. The results showed that CaCO3 was uniformly distributed in cell lumens in impregnated veneers. After impregnation, the maximum weight gain rate was up to 41.4%, and water uptake decreased from 6.82% to 0.94%. The hardness increased from 7.6 to 10.0 MPa, and the extent of wear fell from 0.91% to 0.05%. The ignition time was prolonged, and the heat release rate and total heat release were low. Experimental results demonstrated that CaCO3 improved the physical-mechanical properties and flame retardancy of poplar veneers.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
