Flame retardancy and char microstructure of nylon‐6/layered silicate nanocomposites

Abstract

AbstractWe investigated the effect of organically modified clay alone and in combination with zinc borate on the thermal/flammability behavior of nylon‐6 nanocomposites. Differential thermogravimetric analysis indicated that the peak decomposition temperature was not affected by the addition of clay, but the rate of weight loss decreased with increase in clay concentration. Nanocomposite films of approximately 0.5 mm thickness with 2.5 and 5 wt % clay burned for almost the same duration as neat nylon‐6 but with reduced dripping in horizontal flame test. The 10 wt % clay nanocomposite sample burned without any dripping and the flame spread rate was reduced by 25–30%. Zinc borate/clay containing nanocomposite developed into a very good intumescent system in cone calorimeter test, swelling about 10–13 mm height prior to ignition forming a cellular char structure. This was found to be an effective composition in reducing the heat release and mass loss rate of nylon‐6 by about 65% and at par with 10 wt % clay nanocomposite. Flame retardant behavior could be attributed to distinct char morphologies observed through scanning electron microscopy. Fourier transform infrared spectroscopy of the 10 wt % clay nanocomposite char showed the presence of amides, indicating possible residual polymer within the shielded char. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1540–1550, 2007