Abstract

The flame behaviors and velocity fields of unexcited and excited swirling double-concentric jet flames were experimentally studied. Acoustic excitation was applied to the central fuel jet. The central jet Reynolds and swirl numbers were 2386 and 0.426, respectively. Three characteristic flame behaviors, wrinkled base flame, converged base flame, and diverged base flame were observed by the traditional photographic technique. Jet pulsation intensity dominated the change in the characteristic flame modes. We used a high-speed particle image velocimeter to measure the time-averaged velocity field; results of the excited swirling double-concentric jet flames showed that the streamlines that separate from the central fuel jet exit were significantly deflected toward the central jet axis, while the size of the rotating-inward single-ring vortex decreased as the jet pulsation intensity decreased. Partial flow emitted from the annular air jet flowed over the outer contour of the rotating-inward single-ring vortex and was then entrained into the central fuel jet, with the result that entrainment between the fuel and air was enhanced. The central jet region was formed by two adjacent vorticity-concentrated areas of opposite signs. As acoustic excitation was applied to the central fuel jet, these two areas expanded with increasing jet pulsation intensity. The jet pulsation induced vortical structures periodically evolving from the jet exit with the result that oscillation waveforms of the instantaneous velocities were obtained. The vortical structures entrained fresh air into the central fuel jet in radial direction, resulting in the extreme radial and axial turbulence intensities and improved mixing between fuel and air.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.