Abstract
It is essential to obtain the five-degrees-of-freedom (5-DOF) error motion of a rotary table to reconstructthe real trajectory of the rotating shaft, but there are many error coupling problems when measuring the error motion of a rotary table. In order to improve the measurement accuracy of the 5-DOF error motion of the rotary table, a method of measuring the error motions based on bidirectional multi-point error separation (BMPES) is proposed. First, by analyzing the motion characteristics of the rotary table with multiple degrees of freedom error during the rotation, a detection system with a double-layer structure probe arrangement is designed. Then, the three-point method is used in the radial direction to separate the roundness error of the measuring disk, which improves the measurement accuracy of radial error. Finally, the coupling relationship between the mixing errors collected by the axial probes is researched, and a face-four-point error separation method is proposed, which can separate the flatness error of the lower surface of the measuring disk and complete the decoupling of the tilt error and the axial runout error. Simulation results show that for the measurement of radial, tilt and axial errors, the measurement errors of the BMPES method proposed in this paper are reduced by 97.89%, 68.40% and 99.99%, respectively, compared with the five-point method, and when eccentricity errors exist, the measurement errors of the radial and tilt errors are reduced by 99.06% and 85.67%, which verifies that the method can accurately obtain the 5-DOF motion of the rotary table errors.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.