Fit of High-Translucency Zirconia Fixed Dental Prostheses Using Two Different Intraoral Scanners.

Abstract

To assess the marginal and internal fit of monolithic zirconia fixed dental prostheses (FDPs) comparing two different intraoral scanners (IOSs) and assessment methods. A maxillary typodont with three prepared teeth allowed fabrication of five-unit high-translucency monolithic zirconia FDPs. The typodont was scanned with two IOSs: Cerec Omnicam and 3Shape TRIOS 3. In total, 30 FDPs were milled from presintered high-translucency zirconia blocks. Dual-scan and silicone replica assessments were used to determine marginal and internal gaps. A statistical significance was observed for marginal gaps (3Shape [74.27 ± 10.4 μm] and Cerec [86.45 ± 14.3 μm]) and for internal gaps (3Shape [126.12 ± 12.7 μm] and Cerec [112.38 ± 17.2 μm]). The outcomes of this study showed that the 3Shape TRIOS 3 produced a better overall marginal fit, while the Cerec Omnicam created a better internal fit. Additionally, a greater overall marginal and internal gap was noted with the silicone replica method over the dual-scan method.