Abstract

The effect of carbonyl sulfide (COS) impurity present in syngas on the performance of a traditional cobalt catalyst (0.5%Pt-25%Co/Al2O3) was investigated for Fischer-Tropsch synthesis (FTS) using a continuously stirred tank reactor (CSTR). Reports about the use of COS as sulfur carrier for the poisoning of cobalt catalysts for FTS are scarce. The S-poisoned and un-poisoned catalysts were tested at industrially relevant FTS conditions and also compared at the same CO conversion level in order to evaluate the effect of sulfur on catalyst activity and product selectivity. The COS (1.8 ppmv) addition caused a significant irreversible effect on the activity. At similar CO conversion level, the COS poisoned catalyst exhibited higher methane and C2–C4 selectivities and lower C5+ selectivity compared to the clean or un-poisoned catalyst. The COS poisoned catalysts were characterized by X-ray adsorption near edge structure (XANES) analysis to find out the reason for the deactivation and altering of the product selectivities. The sulfur K-edge XANES results clearly indicate the formation of cobalt sulfide, which is known to enhance the hydrogenation ability. The olefin/paraffin ratio of the COS poisoned catalyst was found to be lower than that of the clean catalyst, providing further indication of the higher hydrogenation activity of the COS poisoned catalyst.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.