Abstract
Stress shielding phenomenon has become a major drawback to the use of metallic biomaterials for orthopaedic implants applications. In this study, a TiMo(Nb, Zr and Nb+Zr) alloy system was investigated to design and develop novel low elastic Young's modulus Ti based alloy for implant application. The development and application of predictive modelling and simulation are transforming the materials engineering discovery process. To this end, ab initio calculation was used to evaluate the effects of composition on structural, elastic and electronic properties of the materials. The data obtained from both theory and experiment were analysed and compared with each other. Notable findings include low elastic Young's modulus values of 70.2GPa, 80.6GPa, 76.5GPa, 59.1GPa and 32.3GPa for the Ti6Mo6Zr, Ti6Mo6Nb, Ti6Mo6Nb2Zr, Ti6Mo5Nb3Zr and Ti6Mo4Nb4Zr alloys, respectively ascribed to the unique elastic softening of their C′ and C44 shear moduli. The consistency in both results is discussed in terms of the sensitivity of the physical and electronic properties to the alloying additions. Thus, the result indicates the approach can enhance the reduction of elastic Young's modulus of metallic biomaterials for replacing some commonly used high modulus materials and prevent stress shielding in orthopaedic implants.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
