First implementation of quality control procedures on selected X-ray machines in South of Benin

Abstract

Abstract Introduction: The use of X-ray equipment for medical diagnostic radiography procedures has increased due to advances and complexity of radiological procedures. Achieving good image quality while keeping exposure of workers, public and patient exposure to an acceptable level has become a prerequisite for the radiology department in order to comply with best international practices. The aim of this study was to undertake quality control measurement of seven (7) diagnostic radiography equipment in the south of Benin, the first of its kind. Material and methods: Multifunction detector (Piranha) and beam alignment test tool were used to perform quality control tests on seven (7) X-ray units. The method used as well as the interpretation of the results was based on the American Association of Physicists in Medicine (AAPM), United States Food and Drug Administration (FDA), Healing Arts Radiation Protection (HARP), Institute of Physics and Engineering in Medicine (IPEM), International Atomic Energy Agency (IAEA) and Canadian Safety code 35 (S.C 35) recommendations. Results: The quality control results showed that all X-ray equipment investigated were within standard limits for accuracy of exposure time below 10 ms; reproducibility of kVp, exposure time and dose output; specific dose-kVp2 linearity; and specific dose-mAs linearity. Five (5) out of seven (7) diagnostic X-ray machines passed quality control tests such as X-ray beam alignment, exposure time above 10 ms and kVp accuracy. One (1) X-ray machine failed the quality control test of beam filtration at 70 kVp and above. Conclusions: The findings of this study have provided baseline data for other radiology departments to embark on similar QA/QC activities, and also explore options for optimization of patient dose. However, there is a need to extend the study to cover more diagnostic X-ray machines throughout the country. It is anticipated that this would ultimately assist in improving radiation protection and safety during medical diagnostic radiological procedures.