FIRST, a fibered aperture masking instrument

Abstract

FIRST is a prototype instrument built to demonstrate the capabilities of the pupil remapping technique, using single-mode fibers and working at visible wavelengths. We report on observations of the binary system Capella at three epochs over a period of 14 months with FIRST-18 (that recombines 2 sets of 9 fibers) mounted on the 3-m Shane telescope at Lick Observatory. The binary separation during our observations ranges from 0.8 to 1.2 times the diffraction limit of the telescope at the central wavelength. We successfully resolved the Capella binary system with an astrometric precision as good as 1mas under the best observing conditions. FIRST also gives access to the spectral flux ratio between the two components directly measured with an unprecedented spectral resolution (around 300) over the 600-850nm range. In particular, our data allow to detect the well-known overall slope of the flux ratio spectrum, leading to an estimation of the pivot wavelength of 0.64+/-0.01um, at which the cooler component becomes the brightest. Spectral features arising from the difference in effective temperature (specifically the Halpha line, TiO and CN bands) have been used to constrain the stellar parameters. The effective temperatures we derive for both components are slightly lower (5-7%) than the well-established properties for this system. This difference mainly originates from deeper molecular features than those predicted by state-of-the-art stellar atmospheric models, suggesting that molecular line lists used in the photospheric models are incomplete and/or oscillator strengths are underestimated (most likely concerning the CN molecule). These results demonstrate the power of FIRST, a fibered pupil remapping based instrument, in terms of high angular resolution and show that the direct measurement of the spectral flux ratio provides valuable information to characterize little known companions.