Abstract
A series of real-scale fire experiments were performed to determine the size and mass distribution of firebrands generated from Douglas-fir (Pseudotsuga menziesii) trees. The experiments were performed in the Large Fire Laboratory at the National Institute of Standards and Technology. The Douglas-fir trees used for the experiments ranged in total height from 2.6 to 5.2 m and the tree moisture content was varied. An array of pans filled with water was used to collect the firebrands that were generated from the burning trees. This ensured that firebrands would be quenched as soon as they made contact with the pans. The firebrands were subsequently dried and the sizes were measured using callipers and the dry mass was determined using a precision balance. For all experiments performed, the firebrands were cylindrical in shape. The average firebrand size measured from the 2.6-m Douglas-fir trees was 3 mm in diameter, 40 mm in length. The average firebrand size measured for the 5.2-m Douglas-fir trees was 4 mm in diameter with a length of 53 mm. The mass distribution of firebrands produced from two different tree sizes under similar tree moisture levels was similar. The only noticeable difference occurred in the largest mass class. Firebrands with masses up to 3.5 g to 3.7 g were observed for the larger tree height used (5.2 m). The surface area of the firebrands scaled with firebrand weight.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.