Abstract

Up to now only little knowledge has been recorded about the fire behavior and flame retardancy of wood-plastic composites (WPCs). The use of WPCs has increased continuously in recent years. Especially in their main field of application as a decking material, WPCs present a big share of the market. To date no flame-retarded solution has been introduced for WPC materials that fulfils the necessary requirements. But flame-retarded materials are indispensable, especially for indoor use and the protection of escape routes. In this study basic knowledge about the fire behavior of WPCs is investigated first. Second, the effectiveness and mode of action of different flame-retardant additives is investigated. Special attention is drawn to products made of WPC material. Therefore WPC was further investigated in its main field of application as decking boards. The fire behavior of materials and products was investigated by means of cone calorimeter measurements as well as radiant panel tests. Furthermore numerical simulations were carried out to study the effects of various thermal material properties on burning behavior. Thermal decomposition was studied using thermogravimetric methods and spectroscopic investigations. Against this background, models for thermal decomposition pathways were built for combinations of WPC material with different flame retardants. WPCs show burning behavior similar to that of pure wood samples with an increased heat release rate due to polymeric fractions. It is shown that all investigated flame retardants had a positive effect on the burning behavior of WPCs. The best results were achieved by the flame retardants ammonium polyphosphate, Paxymer and expandable graphite. Especially in combination with red phosphorus, expandable graphite was highly effective because red phosphorus stabilized formed residue. Apart from the influence of flame retardants, other influencing factors like geometry and moisture content also played an important role concerning the flame retardancy of WPC decking boards. Indeed, hollow decking boards offer a reduced amount of combustible material, but their flame spread is increased in comparison to solid samples.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call