Abstract
This paper reports a novel fire-extinguishing agent: an aqueous dispersion of fine ferrocene particles. In this study, the ferrocene–water–surfactant dispersions were prepared to optimize the gas-phase concentration of ferrocene, and their ability to extinguish heptane fires was examined. The fire-extinguishing efficiency was characterized by three parameters: the ferrocene concentration in the dispersion (0–175ppm), the surfactant used, and the ferrocene particle size (d50=10.4, 11.4, 21.5, and 68.8μm). The results indicated that (1) the ferrocene (d50=10.4mm)–water–surfynol 465 dispersion is the most stable among the dispersions tested, (2) the ferrocene–water–surfynol 465 dispersions have an optimal value of ferrocene concentration regarding the extinguishing time, and (3) in the ferrocene particle size range of 10.4–21.5μm, the minimum extinguishing time of the ferrocene–water–surfynol 465 dispersions is remarkably shorter (1.2s) than those observed when using a conventional wet chemical agent (45wt% aqueous solution of potassium carbonate, 12.9s).
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
