Abstract
Abstract The finite-element method was used to model the consolidation process of continuous Al2O3 fiber-reinforced NiAl composites. Actual creep behavior of NiAl was accounted for including the instantaneous strain and primary creep behavior. Primary creep played a very important role in the consolidation process at high temperatures and high pressures. Various processing parameters were investigated to evaluate the effects of temperature and hot-pressing stress on the consolidation behavior. It was found that the effect of pressure on consolidation was more significant at high temperatures due to its strong influence on the creep rate during power-law creep. The effects of fiber volume fraction and the arrangement of the matrix-coated fibers were also analysed. The simulations recommend an optimal fiber volume fraction in the range of 30%–50 %. Fully dense composites were fabricated according to the predicted processing conditions, and good agreement between simulation and experiment was achieved.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.