Abstract
Due to the influence of the wall thickness, uneven heat transfer, and heat generation inside the resin during the molding of the composite material, the uneven temperature field distribution of the composite material is caused. This paper uses ABAQUS to perform finite element simulation on the temperature field of the forming process and obtains the distribution of the internal temperature field of the composite material. On the premise of obtaining the temperature field, through thermo-solid coupling simulation experiment, the influence of various factors on the entire curing process is compared. Based on the use of finite element simulation software, several comparative tests were carried out, and the residual stress problems in the curing process were verified by calling the stress and strain values of representative points. This article focuses on the analysis of temperature and energy data in heat transfer and 15 sets of stress-strain data under coupling action. On the premise of giving the reasons for each data, the accuracy and practicality of the data are analyzed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Earth and Environmental Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
