Abstract
Cobalt–chromium–molybdenum (Co–Cr–Mo) alloys are used extensively within the biomedical industry for hip, knee and shoulder prostheses. These components are manufactured using a range of different processes which includes machining. However, material properties such as high hardness, high wear resistance and strain rate hardening classifies these alloys as difficult to cut materials. Finite Element (FE) Modelling of machining processes can reduce the number of machining tests required for optimisation. The aim of the present work was to develop a FE model that can predict the orthogonal forces during the machining of biomedical grade Co–Cr–Mo alloy. To achieve this, it was necessary to develop the constitutive material model for this alloy. A modified Zerilli–Armstrong model was found to have the greatest predication capability compared to a modified Johnson–Cook and a strain compensated Arrhenius-type model. An orthogonal cutting finite element model was developed using Deform 3D over a range of different feed rates and cutting speeds. The model predicted the cutting forces to a high degree of accuracy (less than 5% error) over a range of different feed rates at low cutting speeds.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: CIRP Journal of Manufacturing Science and Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.