Abstract
This paper investigates the finite element simulation to predict the creep response of Wood/PVC (WPVC) composite members before and after strengthening by using high carbon steel (HCS) flat bar strip adhered to the tension side. The creep parameters based on power law models of WPVC composites and the HCS flat bars were determined experimentally. Then, the nonlinear finite element analysis (FEA) software of ABAQUS was applied to predict the creep behaviors of composite members using the obtained experimentally creep parameters of individual component of WPVC composites and HCS flat bars. Good correlation between finite element simulation and experimental results are obtained for all cases. ABAQUS software with power law creep model show good potential for prediction the creep response of WPVC composites before and after strengthening.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
