Finite element modelling of the tricuspid valve: A preliminary study

Abstract

The incomplete efficacy of current surgical repair procedures of the tricuspid valve (TV) demands a deeper comprehension of the physiological TV biomechanics. To this purpose, computational models can provide quantitative insight into TV biomechanical response and allow analysing the role of each TV substructure. We present here a three-dimensional finite element model of the tricuspid valve that takes into account most of its peculiar features. Experimental measurements were performed on human and porcine valves to obtain a more detailed TV anatomical framework. To overcome the complete lack of information on leaflets mechanical properties, we performed a sensitivity analysis on the parameters of the adopted non-linear hyperelastic constitutive model, hypothesizing three different parameter sets for three significant collagen fibre distributions. Results showed that leaflets’ motion and maximum principal stress distribution were almost insensitive to the different material parameters considered. Highest stresses (about 100 kPa) were located near the annulus of the anterior and septal leaflets, while the posterior leaflet experienced lower stresses (about 55 kPa); stresses at the commissures were nearly zero. Conversely, changes in constitutive parameters deeply affected leaflets’ strains magnitude, but not their overall pattern. Strains computed assuming that TV leaflets tissue are reinforced by a sparse and loosely arranged network of collagen fibres fitted best experimental data, thus suggesting that this may be the actual microstructure of TV leaflets. In a long-term perspective, this preliminary study aims at providing a starting point for the development of a predictive tool to quantitatively evaluate TV diseases and surgical repair procedures.